- Select proper tool from the table below.
- Insert pin into tool as illustrated (tab or small dia. first).
- Align pin with socket contact in connector as illustrated.
- Insert pin into contact with gentle firm pressure.
- Remove tool. Use tweezers for next operation.
- Set pin to desired depth and rotate to align tab if necessary.
| To Accept Pin Dia. |
Tool No. |
| 0.009 | T-293-0 |
| 0.012 | T-293-0 T-293-1 |
| 0.015 | T-293-1 |
| 0.018 | T-293-2 |
| Note: Not available for .036 | |